Found 13 Results For "

microalloyed steels

Het super Ronde Microalloyed Staal verchroomt Geplateerde Staaf voor Cilinder

Super Round Microalloyed Steels Chrome Plated Rod For Cylinder Product Description 1. The directly turning non-quenched and tempered steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched and tempered 42CrMo4, 40Cr and CK45 with a variety of mechanical performance requirements. 2. It is mainly used for manufacturing injuection molding machine draglink, engineering machinery push rod and hydraulic

Microalloyed Sterkte van de de Zuigerstangopbrengst van de Staal Hydraulische Cilinder Niet minder dan Mpa 520

Microalloyed Steel Hydraulic Cylinder Piston Rod Yield Strength Not Less Than 520 Mpa Product Description 1. Shortened processing periods, enhance productivity and reduce the occupied capital. 2. Low processing cost, needless quenched and tempered process and the second turning. 3. The steel directly directly turning saves the logistics cost 4. Save manufacturing expenses and avoid waste in the tempering process 5. Energy conservation: Production no quenched and tempered

Microalloyed Staaf van het Staalchroom voor Hydraulische Cilinders met Energiebehoud

Microalloyed Steels Chrome Rod For Hydraulic Cylinders With Energy Conservation Product Description1. Environments protection: Production no quenched and tempered process meets the requirements of environmental protection.2. Energy conservation: Production no quenched and tempered process greatly saves the energy consumption.3. The micro alloy steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched

HY4700 van micro- het Chroomstaaf Legeringsstaalkwaliteiten voor Hydraulische Cilinder

HY4700 Micro Alloy Steel Grades Chrome Rod For Hydraulic Cylinder Product Description 1. The micro alloy steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched and tempered 42CrMo4, 40Cr and CK45 with a variety of mechanical performance requirements. 2. It is mainly used in mechanical manufacturing for the directly turning part of shaft and rod, etc 3. the mechanical property is correspond to

ISO-van het Micro- de Harde Chroom Geplateerde Staaf die Legeringsstaal direct draaien

ISO Micro Alloy Steel Hard Chrome Plated Rod Directly Turning Product Description 1. The mechanical property of non-quenched and tempered steel products is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on the whole cross section. 2. Turning performance: Turning performance is commensurate to 42CrMo4, 40Cr and CK45 or be superior to them. 3. Hardness: Hardness is more uniform on the whole cross section than quenched and tempered

Van het Micro- van het chroomplateren de Zuigerstang Legeringsstaal Met Hoge Eigenschappen

Chrome Plating Micro Alloy Steel Piston Rod With High Properties Product Description 1. The directly turning non-quenched and tempered steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched and tempered 42CrMo4, 40Cr and CK45 with a variety of mechanical performance requirements. 2. the mechanical property is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on

35mm - 140mm van de Micro- de Treksterkte Gelegeerd Staalstaaf Niet minder dan 750mpa

35mm - 140mm Micro Alloyed Steel Rod Tensile Strength Not Less Than 750mpa Product Description1. Turning performance: Turning performance is commensurate to 42CrMo4, 40Cr and CK45 or be superior to them.2. Hardness: Hardness is more uniform on the whole cross section than quenched and tempered 42CrMo4, 40Cr and CK453. Micro struction: Ferrite and pearlite with fine and uniform grain size.4. The steel directly directly turning saves the logistics cost5. Energy conservation:

Lengte 1m - 8m Micro- Gelegeerd Staalstaaf voor Mechanische Productie

Length 1m - 8m Micro Alloyed Steel Rod For Mechanical Manufacturing Product Description1. ISO9001:2008, stable and uniform mechanical properties, the directly turning saves the logistics cost.2. Save manufacturing expenses and avoid waste in the tempering process.3. Shortened processing periods, enhance productivity and reduce the occupied capital4. The mechanical property is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on the whole

01 02

ChroomZuigerstang

Holle Zuigerstang

Hydraulische Zuigerstangen

Harde Chroom Geplateerde Staaf

De Staaf van de staalgids

Het harde Chroom plateerde Bar

Holle Metaalstaaf

Holle Ronde Bar

Inductie Verharde Staaf

De inductie verhardde Bar

DouaneTrekstang

Geslepen Buis

Pneumatische Zuigerstang

Hydraulische Cilinderstaaf

De Schacht van het precisiestaal

Micro- legeringsstaal