Super Round Microalloyed Steels Chrome Plated Rod For Cylinder Product Description 1. The directly turning non-quenched and tempered steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched and tempered 42CrMo4, 40Cr and CK45 with a variety of mechanical performance requirements. 2. It is mainly used for manufacturing injuection molding machine draglink, engineering machinery push rod and hydraulic
Microalloyed Steel Hydraulic Cylinder Piston Rod Yield Strength Not Less Than 520 Mpa Product Description 1. Shortened processing periods, enhance productivity and reduce the occupied capital. 2. Low processing cost, needless quenched and tempered process and the second turning. 3. The steel directly directly turning saves the logistics cost 4. Save manufacturing expenses and avoid waste in the tempering process 5. Energy conservation: Production no quenched and tempered
Microalloyed Steels Chrome Rod For Hydraulic Cylinders With Energy Conservation Product Description1. Environments protection: Production no quenched and tempered process meets the requirements of environmental protection.2. Energy conservation: Production no quenched and tempered process greatly saves the energy consumption.3. The micro alloy steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched
ISO Micro Alloy Steel Hard Chrome Plated Rod Directly Turning Product Description 1. The mechanical property of non-quenched and tempered steel products is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on the whole cross section. 2. Turning performance: Turning performance is commensurate to 42CrMo4, 40Cr and CK45 or be superior to them. 3. Hardness: Hardness is more uniform on the whole cross section than quenched and tempered
Chrome Plating Micro Alloy Steel Piston Rod With High Properties Product Description 1. The directly turning non-quenched and tempered steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched and tempered 42CrMo4, 40Cr and CK45 with a variety of mechanical performance requirements. 2. the mechanical property is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on
35mm - 140mm Micro Alloyed Steel Rod Tensile Strength Not Less Than 750mpa Product Description1. Turning performance: Turning performance is commensurate to 42CrMo4, 40Cr and CK45 or be superior to them.2. Hardness: Hardness is more uniform on the whole cross section than quenched and tempered 42CrMo4, 40Cr and CK453. Micro struction: Ferrite and pearlite with fine and uniform grain size.4. The steel directly directly turning saves the logistics cost5. Energy conservation:
Non Quenched And Tempered Chrome Plated Steel Rod With Stable Mechanical Properties Product Description1. The mechanical properties of micro alloy steel rod is the same as or over than quenched and tempered 42CrMo, 40Cr and CK45, and is very uniform of the whole cross section.2. Hardness of micro alloy steel rod is more uniform than quenched and tempered 42CrMo, 40Cr and CK45.3. The turning performance of non-quenched and tempered steel rod is commensurate or superior to
HY4520 HY4700 Micro Alloy Steel Rod With Ferrite And Pearlite Structure Product Description1. The mechanical property of micro alloy steel rod is stable and uniform2. Production no quenched and tempered process can greatly save the energy consumption.3. Production no quenched and tempered process meets the requirements of environmental protection4. Micro alloy steel rod mainly used in mechanical manufacturing for the directly turning part of shaft and rod, ect5. The
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
