english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
우리의 뉴스레터
할인 등 다양한 정보를 얻으려면 뉴스레터를 구독하세요.
Found 13 Results For "
microalloyed steels
"
실린더를 위한 최고 둥근 Microalloyed 강철 크롬에 의하여 도금되는 막대
Super Round Microalloyed Steels Chrome Plated Rod For Cylinder Product Description 1. The directly turning non-quenched and tempered steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched and tempered 42CrMo4, 40Cr and CK45 with a variety of mechanical performance requirements. 2. It is mainly used for manufacturing injuection molding machine draglink, engineering machinery push rod and hydraulic
Microalloyed 강철 액압 실린더 피스톤간 항복 강도 아닙니다 520 이하 Mpa
Microalloyed Steel Hydraulic Cylinder Piston Rod Yield Strength Not Less Than 520 Mpa Product Description 1. Shortened processing periods, enhance productivity and reduce the occupied capital. 2. Low processing cost, needless quenched and tempered process and the second turning. 3. The steel directly directly turning saves the logistics cost 4. Save manufacturing expenses and avoid waste in the tempering process 5. Energy conservation: Production no quenched and tempered
에너지 보존을 가진 액압 실린더를 위한 Microalloyed 강철 크롬 막대
Microalloyed Steels Chrome Rod For Hydraulic Cylinders With Energy Conservation Product Description1. Environments protection: Production no quenched and tempered process meets the requirements of environmental protection.2. Energy conservation: Production no quenched and tempered process greatly saves the energy consumption.3. The micro alloy steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched
HY4700 액압 실린더를 위한 크롬 막대가 마이크로 합금 강철에 의하여 등급을 매깁니다
HY4700 Micro Alloy Steel Grades Chrome Rod For Hydraulic Cylinder Product Description 1. The micro alloy steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched and tempered 42CrMo4, 40Cr and CK45 with a variety of mechanical performance requirements. 2. It is mainly used in mechanical manufacturing for the directly turning part of shaft and rod, etc 3. the mechanical property is correspond to
ISO 직접 도는 마이크로 합금 강철 단단한 크롬에 의하여 도금되는 막대
ISO Micro Alloy Steel Hard Chrome Plated Rod Directly Turning Product Description 1. The mechanical property of non-quenched and tempered steel products is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on the whole cross section. 2. Turning performance: Turning performance is commensurate to 42CrMo4, 40Cr and CK45 or be superior to them. 3. Hardness: Hardness is more uniform on the whole cross section than quenched and tempered
크롬 도금 높은 재산을 가진 마이크로 합금 강철 피스톤간
Chrome Plating Micro Alloy Steel Piston Rod With High Properties Product Description 1. The directly turning non-quenched and tempered steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched and tempered 42CrMo4, 40Cr and CK45 with a variety of mechanical performance requirements. 2. the mechanical property is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on
35mm - 막대 강철 장력 강도가 140mm 마이크로 컴퓨터에 의하여 750mpa 보다는 보다 적게 합금했습니다
35mm - 140mm Micro Alloyed Steel Rod Tensile Strength Not Less Than 750mpa Product Description1. Turning performance: Turning performance is commensurate to 42CrMo4, 40Cr and CK45 or be superior to them.2. Hardness: Hardness is more uniform on the whole cross section than quenched and tempered 42CrMo4, 40Cr and CK453. Micro struction: Ferrite and pearlite with fine and uniform grain size.4. The steel directly directly turning saves the logistics cost5. Energy conservation:
길이 1m - 8m 기계적인 제조를 위한 마이크로 컴퓨터에 의하여 합금되는 강철 막대
Length 1m - 8m Micro Alloyed Steel Rod For Mechanical Manufacturing Product Description1. ISO9001:2008, stable and uniform mechanical properties, the directly turning saves the logistics cost.2. Save manufacturing expenses and avoid waste in the tempering process.3. Shortened processing periods, enhance productivity and reduce the occupied capital4. The mechanical property is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on the whole
