CK45 Welding Hard Chromed Hydraulic Cylinder Piston Rod Detailed Product Description 1. Hydraulic piston rod manufacturer 2. Material: CK45, ST52, 20MnV6, 42CrMo4, 40Cr 3. Ground and chrome plated 4. All certificate related with material heat treatment and plating is available 1. Chemical Composition: Material C% Mn% Si% S% P% V% Cr% Ck45 0.42-0.50 0.50-0.80 0.04 0.035 0.035 ST52 0.22 1.6 0.55 0.035 0.04 20MnV6 0.16-0.22 1.30-1.70 0.10-0.50 0.035 0.035 0.10-0.20 42CrMo4 0.38
Chrome Plating Micro Alloy Steel Piston Rod With High Properties Product Description 1. The directly turning non-quenched and tempered steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched and tempered 42CrMo4, 40Cr and CK45 with a variety of mechanical performance requirements. 2. the mechanical property is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on
Microalloyed Steels Chrome Rod For Hydraulic Cylinders With Energy Conservation Product Description1. Environments protection: Production no quenched and tempered process meets the requirements of environmental protection.2. Energy conservation: Production no quenched and tempered process greatly saves the energy consumption.3. The micro alloy steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched
Diameter 35 - 140mm Micro Alloy Steel Piston Rods With Environmental Protection Product Description1. Save manufacturing expenses and avoid waste in the tempering process2. Shortened processing periods, enhance productivity and reduce the occupied capital.3. The mechanical property is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on the whole cross section.4. Turning performance: Turning performance is commensurate to 42CrMo4, 40Cr
Microalloyed Steel Hydraulic Cylinder Piston Rod Yield Strength Not Less Than 520 Mpa Product Description 1. Shortened processing periods, enhance productivity and reduce the occupied capital. 2. Low processing cost, needless quenched and tempered process and the second turning. 3. The steel directly directly turning saves the logistics cost 4. Save manufacturing expenses and avoid waste in the tempering process 5. Energy conservation: Production no quenched and tempered
HY4700 Micro Alloy Steel Grades Chrome Rod For Hydraulic Cylinder Product Description 1. The micro alloy steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched and tempered 42CrMo4, 40Cr and CK45 with a variety of mechanical performance requirements. 2. It is mainly used in mechanical manufacturing for the directly turning part of shaft and rod, etc 3. the mechanical property is correspond to
ISO F7 Micro Alloy Steel Hydraulic Cylinder Rods Diameter 35-140 Mm Better Tensile Strength Product Description 1. The directly turning non-quenched and tempered steel products are used for manufacturing injection molding machine draglink, engineering machinery push rod and hydraulic prop with the feature that hardened and tempered steel mechanical property needless quenched and tempered process. 2. Hardness: Hardness is more uniform on the whole cross section than quenched
Corrosion Resistance 42CrMo4 Chrome Piston Rod Custom Diameter The piston rod material 42CrMo4V hardened and hard chrome plated with the material number 1.7225 is suitable for heavy use and is especially wear-resistant thanks to its hardened surface layer with a surface hardness of 56–64 HRC. Due to the material's high stability very high forces can be transmitted, e.g. for small connecting threads with large piston rods. Hard chrome plating means that an especially thick
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
