english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
Tautan Cepat
Kontak Cepat
Alamat
Yangshan Industrial Park Huishan District Wuxi Jiangsu China
Tel
86-510-83958900
Buletin kami
Berlangganan buletin kami untuk mendapatkan diskon dan banyak lagi.
HY4520 HY4700 mikro paduan baja batang dengan ferit dan struktur Pearlite
Atribut Utama
Nama merek:
HY
Tempat Asal:
Cina
Sertifikasi:
ISO9001:2008
Jumlah pesanan minimum:
1 ton
Harga:
negotiable
Kemampuan Penyediaan:
30tons hari
Waktu Pengiriman:
30days
Ketentuan Pembayaran:
T/T, L/C
Standard Packaging:
Anti karat minyak harus diterapkan pada bahan dan setiap batang dikemas dalam kertas lengan
Ringkasan Produk
HY4520 HY4700 Micro Alloy Steel Rod With Ferrite And Pearlite Structure Product Description1. The mechanical property of micro alloy steel rod is stable and uniform2. Production no quenched and tempered process can greatly save the energy consumption.3. Production no quenched and tempered process meets the requirements of environmental protection4. Micro alloy steel rod mainly used in mechanical manufacturing for the directly turning part of shaft and rod, ect5. The
Atribut Kustom Produk
Menyoroti
HY4700 Micro Alloy Steel Rod
,HY4520 baja microalloyed
Nama produk:
Batang baja paduan mikro
Diameter:
35mm - 140mm
Lurus:
Tidak lebih dari 0,2MM/M
Kondisi pasokan:
Pelapisan Chrome Keras
Ketebalan krom:
20 - 30 mikron
Ovalitas:
Setengah dari toleransi ISO f7
Deskripsi Produk
HY4520 HY4700 Micro Alloy Steel Rod dengan Struktur Ferrite dan Pearlite
Deskripsi Produk
1Sifat mekanik dari baja paduan mikro stabil dan seragam
2. produksi tidak mati dan proses tempered dapat sangat menghemat konsumsi energi.
3. Produksi tidak mati dan proses tempered memenuhi persyaratan perlindungan lingkungan
4. baja paduan mikro batang terutama digunakan dalam manufaktur mekanik untuk bagian berputar langsung poros
dan batang, ect
5Waktu pengolahan diperpendek, produktivitas ditingkatkan dan modal yang digunakan
dikurangi..
6Biaya pengolahan rendah, tidak ada kebutuhan untuk proses dimatikan dan tempered dan kedua
berputar tetapi sifat mekanik sesuai dengan mati dan tempered batang piston
Deskripsi Rinci
1Bahan: HY4700, HY4520
2. KOMPOSISI Kimia ((%)
Bahan | C% | Mn% | Si% | S% | P% | V% | Tidak | Cr% | Mo | Cu |
HY4700 | 0.38-0.45 | 1.20 ~ 1.60 | 0.30 ~ 0.50 | ≤ 0.035 | ≤ 0.020 | 0.05 ¢0.15 | ≤ 0.25 | 0.10 ¢ 0.20 | ≤ 0.15 | 0.25 |
HY4520 | 0.40 ~ 0.48 | 0.80 ~ 1.40 | 0.15 ~ 0.35 | ≤ 0.035 | ≤ 0.035 | ≤ 0.15 | ≤ 0.25 | ≤ 0.25 | ≤ 0.15 | ≤ 0.25 |
3. Properti Mekanis
Bahan | Properti Mekanis | Kekerasan permukaan ((HBW) | |||||
Rm ((MPa) | Rel ((MPa) | A% | Z% | KU2 ((J) |
| ||
HY4700 | Φ35 - Φ100 | 900 - 1100 | ≥650 | ≥ 16 | ≥ 35 | ≥ 39 | 270-340 |
> Φ100 - Φ140 | 850 - 950 | ≥ 600 | ≥ 16 | ≥ 35 | ≥ 39 | 270-340 | |
HY4520 | Φ40 - Φ100 | 750 - 900 | ≥520 | ≥ 19 | ≥ 40 | ≥ 39 | 230-290 |
> Φ100 Φ140 | 750 - 900 | ≥520 | ≥ 17 | ≥ 35 | ≥ 39 | 230-290 | |
|
|
|
|
|
|
|
|
4. Kondisi Pasokan
Dihancurkan dan dilapisi krom
5. ketebalan krom
20 sampai 30 mikron
6. Toleransi pada hari
ISO f7 pada diameter
7.Kekerasan permukaan
850-1150HV (Vickers 100g)
8. Kejujuran
≤ 0,2MM/M
9. OVALITY
Setengah dari toleransi ISO f7
10. Keruwetan permukaan
Ra≤0,2 mikron dan Rt≤2 mikron
11. ketahanan korosi
Uji dengan semprotan garam alami menurut ASTM B 117-120 jam
Evaluasi hasil menurut ISO 4540 RATING 7-10
12. WELDABILITY
Bagus sekali.
13.POROSITAS
Uji menurut ISO 1456/1458 dan evaluasi hasil menurut ISO 4540 rating 8-10
14. Pengemasan
Minyak anti karat yang akan diterapkan pada bahan dan setiap batang yang akan dikemas dalam sleeve kertas
15. kohesi
Tidak ada retak, pecah atau lepas setelah kelelahan termal (menghangatkan pada 300 derajat celcius)
dan pendinginan dalam air)
16. CERTIFICATE
Semua sertifikat yang terkait dengan pengolahan panas dan plating bahan diperlukan
Produk terkait
Kelas Kekuatan tinggi Keras Chrome Disepuh Rod Micro Alloy Steel
High Strength Hard Chrome Plated Rod Micro Alloy Steel Grades Product Description 1. The micro alloy steel products are developed on the basis of proprietary technology of the control rolling and cooling for substituting quenched and tempered piston rods with a variety of mechanical performance requirements. 2. Micro alloy steel rod mainly used in mechanical manufacturing for the directly turning part of shaft and rod, ect. For instance, it is used for manufacturing injection
Langsung mengubah mikro paduan baja krom berlapis batang untuk konstruksi
Directly Turning Micro Alloyed Steel Chrome Plated Rods For Construction Product Description 1. The micro alloy steel products are developed on the basis of proprietary technology of the control rolling and cooling for substituting quenched and tempered piston rods with a variety of mechanical performance requirements. 2. The mechanical property is correspond to quenched and tempered piston rods or over them and very uniform on the whole cross section. 3. Hardness is more
Bebas dipadamkan dan marah krom berlapis baja batang dengan sifat mekanik yang stabil
Non Quenched And Tempered Chrome Plated Steel Rod With Stable Mechanical Properties Product Description1. The mechanical properties of micro alloy steel rod is the same as or over than quenched and tempered 42CrMo, 40Cr and CK45, and is very uniform of the whole cross section.2. Hardness of micro alloy steel rod is more uniform than quenched and tempered 42CrMo, 40Cr and CK45.3. The turning performance of non-quenched and tempered steel rod is commensurate or superior to
Hard Chrome Rod mikro paduan baja dengan kinerja unggul balik
Hard Chrome Rod Micro Alloy Steel With Superior Turning Performance Product Description1. Low processing cost, needless quenched and tempered process and the second turning.2. Shortened processing periods, enhance productivity and reduce the occupied capital.3. Stable and uniform mechanical properties4. Energy conservation: Production no quenched and tempered process greatly saves the energy consumption.5. Environments protection: Production no quenched and tempered process
Panjang 1m - 8m Micro paduan Batang Baja Untuk Manufaktur Teknik
Length 1m - 8m Micro Alloyed Steel Rod For Mechanical Manufacturing Product Description1. ISO9001:2008, stable and uniform mechanical properties, the directly turning saves the logistics cost.2. Save manufacturing expenses and avoid waste in the tempering process.3. Shortened processing periods, enhance productivity and reduce the occupied capital4. The mechanical property is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on the whole
Diameter 35-140mm mikro paduan baja Piston batang dengan perlindungan lingkungan
Diameter 35 - 140mm Micro Alloy Steel Piston Rods With Environmental Protection Product Description1. Save manufacturing expenses and avoid waste in the tempering process2. Shortened processing periods, enhance productivity and reduce the occupied capital.3. The mechanical property is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on the whole cross section.4. Turning performance: Turning performance is commensurate to 42CrMo4, 40Cr
Microalloyed Baja Chrome Rod Untuk Hydraulic Silinder Dengan Konservasi Energi
Microalloyed Steels Chrome Rod For Hydraulic Cylinders With Energy Conservation Product Description1. Environments protection: Production no quenched and tempered process meets the requirements of environmental protection.2. Energy conservation: Production no quenched and tempered process greatly saves the energy consumption.3. The micro alloy steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched
Ferit Dan Perlit Micro Alloy Steel Round Rod Hidrolik Piston Rod
Ferrite And Pearlite Micro Alloy Steel Round Rod Hydraulic Piston Rod Product Description1. Energy conservation: Production no quenched and tempered process greatly saves the energy consumption.2. Environments protection: Production no quenched and tempered process meets the requirements of environmental protection.3. The mechanical property is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on the whole cross section.4. Turning
