english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
우리의 뉴스레터
할인 등 다양한 정보를 얻으려면 뉴스레터를 구독하세요.
Found 377 Results For "
hard chrome plated rods
"
비 - 도금되는 액압 실린더 막대 냉각하고 부드럽게 한 강철 크롬
Non - Quenched And Tempered Steel Hydraulic Cylinder Rod Chrome Plated Product Description 1. Non-quenched and tempered steel products is used in mechanical manufacturing for the directly turning part of shaft and rod, ect. 2. Save manufacturing expenses and avoid waste in the tempering process. 3. Shortened processing periods, enhance productivity and reduce the occupied capital. 4. Low processing cost, needless quenched and tempered process and the second turning. 5. The
ISO f7를 가진 크롬 피스톤간 고강도 직경 6mm - 1000mm
High Strength Chrome Piston Rod Diameter 6mm - 1000mm with ISO f7 Piston Rod Size: Ø 6-300mm Length: 3m -8m Material: 45# DIN CK45/JIS 45C Tolerance: ISO f7 Chrome thickness: 20~30micron Hardness of the chrome layer: 850HV(min) Roughness: Ra 0.2micron (max) Straightness: 0.2/1000mm Mechanical properties: (CK45/JIS 45C) Yield Strength ≥320 Mpa Tensile Strength ≥580 Mpa Elongation ≥ 15% Chemical Composition: Material C% Mn% Si% S% P% V% Cr% Ck45 0.42-0.50 0.50-0.80 0.04 0.035 0
40Cr 크롬 피스톤간의 크롬에 의하여 도금되는 감응작용에 의하여 강하게 하는 막대
40Cr Chrome Piston Rod , Chrome Plated Induction Hardened Rod Detailed Product Description 1. Material: CK45, ST52, 20MnV6, 42CrMo4, 40Cr 2. ISO9001:2008 3. Ground and chrome plated 3. Piston rod manufacturer 4. Good quality, best service Detailed Description 1.CHEMICAL COMPOSITION Material C% Mn% Si% S% P% V% Cr% Ck45 0.42-0.50 0.50-0.80 0.04 0.035 0.035 ST52 0.22 1.6 0.55 0.035 0.04 20MnV6 0.16-0.22 1.30-1.70 0.10-0.50 0.035 0.035 0.10-0.20 42CrMo4 0.38-0.45 0.60-0.90 0.15
크롬 도금 높은 재산을 가진 마이크로 합금 강철 피스톤간
Chrome Plating Micro Alloy Steel Piston Rod With High Properties Product Description 1. The directly turning non-quenched and tempered steel products are developed on the basis of the proprietary technology of the control rolling and cooling for substituting quenched and tempered 42CrMo4, 40Cr and CK45 with a variety of mechanical performance requirements. 2. the mechanical property is correspond to quenched and tempered 42CrMo4, 40Cr and CK45 or over them and very uniform on
Chrome는 빈 강철 둥근 막대 높은 항복 강도 및 장력 강도를 도금했습니다
Chrome Plated Hollow Steel Round Rod Yield Strength Tempered Detailed Product Description 1. Material: 42CrMo4, 40Cr, CK45,ST52, 20MnV62. Tensile strength: Not less than 610 N/MM23. Yield strength: Not less than 355 N/MM24. Advanced inspection apparatus5. Condition: Chrome plated, Quenched / Tempered, Induction hardened, Q / T Induction hardened Detailed Description1.CHEMICAL COMPOSITIONMaterialC%Mn%Si%S%P%V%Cr%Ck450.42-0.500.50-0.800.040.0350.035 ST520.221.60.550.0350.04
부식 방지 42CrMo4, 40Cr 원형 인덕션 경화 바 크롬 접착
Corrosion Proof 42CrMo4, 40Cr Round Induction Hardened Bar With Chrome Plated Detailed Product Description 1. Material: CK45, ST52, 20MnV6, 42CrMo4, 40Cr 2. Ground and chrome plated 3. ISO9001:2008 4. Advanced inspection apparatus 5. Condition: Chrome plated, Quenched / Tempered, Induction hardened, Q / T Induction hardened 6:Case depth:1.5mm~2.5mm Induction hardness: HRC55±5 Detailed Description 1.CHEMICAL COMPOSITION Material C% Mn% Si% S% P% V% Cr% Ck45 0.42-0.50 0.50-0.80
실을 꿴 막대가 도금된 ST52/20MnV6 빈 강철 막대 크롬에 의하여, 속을 비게 합니다
ST52 / 20MnV6 Hollow Steel Rod Chrome Plated , Hollow Threaded Rod Detailed Product Description 1. Material: 42CrMo4, 40Cr, CK45,ST52, 20MnV6 2. Length: 1000mm - 8000mm 3. Advanced inspection apparatus 4. Complete manufactured equipment 5. Condition: Chrome plated, Quenched / Tempered, Induction hardened, Q / T Induction hardened Detailed Description 1.CHEMICAL COMPOSITION Material C% Mn% Si% S% P% V% Cr% Ck45 0.42-0.50 0.50-0.80 0.04 0.035 0.035 ST52 0.22 1.6 0.55 0.035 0.04
크롬에 의하여 도금되는 강철 빈 피스톤간 높은 항복 강도 355 N/MM2
Chrome Plated Steel Hollow Piston Rod High Yield Strength 355 N/MM2 Detailed Product Description1. Material: CK45, ST52, 20MnV6, 42CrMo4, 40Cr2. Ground and chrome plated3. Standard length: 1000mm - 8000mm4. Tensile strength: Not less than 610 N/MM25. Yield Strength: Not less than 355 N/MM2 Detailed Description1.CHEMICAL COMPOSITIONMaterialC%Mn%Si%S%P%V%Cr%Ck450.42-0.500.50-0.800.040.0350.035 ST520.221.60.550.0350.04 20MnV60.16-0.221.30-1.700.10-0.500.0350.0350.10-0.20
